|Grade||Genuine Rolex||AAA Swiss||Swiss||Automatic|
|Movement||Rolex Calibre 4130||Genuine Swiss Clone 4130 movement||Swiss 7750 Movement||Asian MingZhu Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
Band Material: 316L. The band is made of the best 316L steel, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Bezel Material: Diamond Bezel. The diamond bezel is the prime material used for watch making. It has made of diamond material. It needs to be durable and can resist abrasion. The design of diamond material makes it suitable for the watch bezel because of its ability to withstand a lot of pressure and friction. Tips: not real diamond.
Watch Case: 316L. The raw material of this watch is the hardest 316L, one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Crystal: Sapphire Crystal. The watch is made of sapphire, high-end, and has a good reputation. Tips: The A Replica is applied with mineral glass instead of sapphire.
Water Resistance: 30 meters. A good waterproof of the watch has been applied, it is 30 meters that is enough for no worries. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Hand: Silver-tone. For the watch, the hands is silver-tone, which fits your watch’s dial well.
Luminiscence: Hands. About the watch, the luminiscence is hands. With this watch, you will not lose your time in dark.
Case Back: Solid. The strong case back is the most important part of the watch. It is strong, durable and scratch resistant.
Second Markers: Minute Markers around the outer rim. The design of the minute markers on the dial around the outer rim is shown in the picture above.
Clasp: Fold Over Clasp. The clasp of the watch to make it easier and quicker for the user to open and fold the case over to keep it secure.